PCSD.86.A

Taoglas PCSD.86.A

Part No:

PCSD.86.A

Manufacturer:

Taoglas

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

39696112-PCSD.86.A

Description:

PCS.86.A Reach Low Profile Wideband Cellular 5G/4G SMD Antenna Evaluation Board

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Protocol - WiFi - 802.11
    WiFi
  • Factory Pack QuantityFactory Pack Quantity
    1
  • Manufacturer
    Taoglas
  • Brand
    Taoglas
  • Tool Is For Evaluation Of
    PCS.86.A
  • Protocol - Sub GHz
    Sub GHz
  • RoHS
    Details
  • For Use With
    Low Profile Wideband Cellular - 5G/4G SMD Antenna
  • Dimensions
    123.2 mm x 33 mm x 0.8 mm
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -10°C ~ 70°C
  • Series
    SXT324
  • Size / Dimension
    0.126 L x 0.098 W (3.20mm x 2.50mm)
  • Type
    MHz Crystal
  • Subcategory
    Development Tools
  • Frequency
    38.4 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±30ppm
  • ESR (Equivalent Series Resistance)
    40 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    17pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±20ppm
  • Product Type

    a group of products which fulfill a similar need for a market segment or market as a whole.

    Antenna Development Tools
  • Product
    Evaluation Boards
  • Product Category

    a particular group of related products.

    Antenna Development Tools
  • Height Seated (Max)
    0.031 (0.80mm)
0 Similar Products Remaining