TAIYO YUDEN FK2125T167AL-T

Package / Case

Wide 2512 (6432 Metric), 1225

Mounting Type

Surface Mount

Supplier Device Package

1225

Package

Tape & Reel (TR)

Mfr

TE Connectivity Passive Product

Product Status

Active

Resistance - Channel (Ohms)

2

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

10V

Operating Temperature-Min

-25 °C

Operating Temperature-Max

85 °C

Rohs Code

Yes

Manufacturer Part Number

FK2125T167AL-T

Insertion Loss-Max

1 dB

DC Resistance-Max

2 Ω

Manufacturer

TAIYO YUDEN

Part Life Cycle Code

Active

Ihs Manufacturer

TAIYO YUDEN CO LTD

Risk Rank

5.78

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

3430

Size / Dimension

0.126 L x 0.252 W (3.20mm x 6.40mm)

Tolerance

±1%

Pbfree Code

Yes

Number of Terminations

2

ECCN Code

EAR99

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±100ppm/°C

Type

Low Pass

Resistance

270 kOhms

Composition

Thick Film

Applications

Data Lines for Mobile Devices

Power (Watts)

3W

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

T-TYPE CIRCUIT; CUT-OFF FREQUENCY 160 MHZ

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8504.50.80.00

Packing Method

TAPE AND REEL

Technology

LC (T-Type)

Number of Functions

1

Reach Compliance Code

unknown

Physical Dimension

L2.0XB1.25XH1.0 (mm)/L0.079XB0.049XH0.039 (inch)

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Number of Channels

1

Current

100 mA

Filter Type

DATA LINE FILTER

Rated Current

0.1 A

ESD Protection

No

Attenuation Value

Attenuation is the loss of signal strength in networking cables or connections. This typically is measured in decibels (dB) or voltage and can occur due to a variety of factors. It may cause signals to become distorted or indiscernible.

20dB @ 500MHz

Rated Voltage

10 V

Output Impedance

50 OHM Ω

Insulation Resistance-Min

30 MΩ

Filter Order

The order of a filter also indicates the minimum number of reactive components that the filter will require. For example, a third-order filter requires at least three reactive components one capacitor and two inductors, two capacitors and one inductor, or in the case of an active filter, three capacitors.

3rd

Values

-

Center / Cutoff Frequency

160MHz (Cutoff)

Features

Automotive AEC-Q200

Attenuation Frequency-Max

500 MHz

Attenuation Frequency-Min

350 MHz

Height Seated (Max)

0.031 (0.80mm)

Height

0.047 (1.20mm)

Width

1.25 mm

Length

2 mm

Ratings

AEC-Q200