STMicroelectronics TS391ILT

Lifecycle Status

ACTIVE (Last Updated: 7 months ago)

Factory Lead Time

14 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

SC-74A, SOT-753

Number of Pins

5

Weight

4.535924g

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

5

ECCN Code

EAR99

Type

General Purpose

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

500mW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Number of Functions

1

Supply Voltage

5V

Base Part Number

TS391

Pin Count

a count of all of the component leads (or pins)

5

Output Type

CMOS, DTL, ECL, Open-Collector, TTL

Number of Circuits

1

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

500μA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

500mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

16mA

Max Supply Current

500μA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

1.25mA

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

1.3 μs

Voltage - Supply, Single/Dual (±)

2V~36V ±1V~18V

Output Current per Channel

16mA

Input Offset Voltage (Vos)

1mV

Voltage Gain

106.02dB

Average Bias Current-Max (IIB)

0.4μA

Supply Voltage Limit-Max

36V

Max Input Current

250nA

Dual Supply Voltage

9V

Input Bias Current

250nA

Max Junction Temperature (Tj)

150°C

Voltage - Input Offset (Max)

5mV @ 5V

Current - Input Bias (Max)

0.25μA @ 5V

Natural Thermal Resistance

250 °C/W

Current - Output (Typ)

16mA @ 5V

Height

1.45mm

Length

3mm

Width

1.75mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free