STMicroelectronics STG3696EQTR

Lifecycle Status

ACTIVE (Last Updated: 7 months ago)

Factory Lead Time

8 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

10-UFQFN

Number of Pins

10

Weight

7.002332mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

5 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e4

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

10

ECCN Code

EAR99

Resistance

5Ohm

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Applications

Audio, USB

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1.12W

Terminal Position

QUAD

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

3V

Terminal Pitch

The center distance from one pole to the next.

0.4mm

Base Part Number

STG3696

Output

SEPARATE OUTPUT

Pin Count

a count of all of the component leads (or pins)

10

Number of Channels

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

4.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.7V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2.4μA

Max Supply Current

36μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

85 μs

Supply Type

Single

-3db Bandwidth

850MHz

On-State Resistance (Max)

5Ohm

Multiplexer/Demultiplexer Circuit

2:1

Off-state Isolation-Nom

65 dB

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPDT

Switching

BREAK-BEFORE-MAKE

Switch-on Time-Max

85000ns

Switch-off Time-Max

5000ns

Voltage - Supply, Single (V+)

2.7V~4.5V

Features

USB 2.0

Length

1.8mm

Height Seated (Max)

0.55mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free