STMicroelectronics PSD954F2V-90J

Package / Case

PLCC

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Memory Types

FLASH

Number of I/Os

27

Published

1999

JESD-609 Code

e0

Number of Terminations

52

ECCN Code

EAR99

Terminal Finish

Tin/Lead (Sn/Pb)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

70°C

Min Operating Temperature

0°C

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8542.39.00.01

Terminal Position

QUAD

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

J BEND

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Supply Voltage

3.3V

Terminal Pitch

The center distance from one pole to the next.

1.27mm

Reach Compliance Code

not_compliant

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Pin Count

a count of all of the component leads (or pins)

52

JESD-30 Code

S-PQCC-J52

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

COMMERCIAL

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

3.6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

3V

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

4

uPs/uCs/Peripheral ICs Type

PARALLEL IO PORT, GENERAL PURPOSE

Standby Current-Max

0.0001A

Number of Gates

The number of gates per IC varies depending on the number of inputs per gate. Two?input gates are common, but if only a single input is required, such as in the 744 NOT(or inverter) gates, a 14 pin IC can accommodate 6 (or Hex) gates.

2000

Access Time (Max)

9e-8 ns

UV Erasable

N

ROM Size (bits)

2359296Bits

Length

19.1262mm

Height Seated (Max)

4.57mm

Width

19.1262mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant