LPS331APY

STMicroelectronics LPS331APY

Part No:

LPS331APY

Manufacturer:

STMicroelectronics

Datasheet:

LPS331AP

Package:

16-VFLGA

ROHS:

AINNX NO:

4693235-LPS331APY

Description:

Board Mount Pressure Sensors MEMS 260 -1260 mbar 0.020 RMS 5.5uA 30uA

Products specifications
  • Factory Lead Time
    26 Weeks
  • Mount
    Surface Mount
  • Package / Case
    16-VFLGA
  • Number of Pins
    16
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C~85°C
  • JESD-609 Code
    e4
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    3 (168 Hours)
  • ECCN Code
    EAR99
  • Terminal Finish
    Nickel/Gold (Ni/Au)
  • Applications
    Board Mount
  • Voltage - Supply
    1.7V~3.6V
  • Base Part Number
    LPS331
  • Output
    24 b
  • Body Length or Diameter
    3mm
  • Body Breadth
    3 mm
  • Output Type
    I2C, SPI
  • Termination Type
    SOLDER
  • Nominal Supply Current

    Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

    30μA
  • Number of Bits
    24
  • Accuracy
    ±0.003PSI (±0.02kPa)
  • Operating Pressure

    An operating pressure is the amount of internal force applied to the walls of some type of pressure vessel during normal conditions.

    3.77PSI ~ 18.27PSI (26kPa ~ 126kPa)
  • Pressure Type
    Absolute
  • Port Style
    No Port
  • Maximum Pressure
    290.08PSI (2000kPa)
  • Sensors/Transducers Type
    PRESSURE SENSOR,PEIZORESISTIVE
  • Housing
    PLASTIC
  • Max Pressure
    290.08 PSI
  • Pressure Range-Max
    18.274 Psi
  • Features
    Temperature Compensated
  • Body Height
    1mm
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for STMicroelectronics LPS331APY.