STMicroelectronics HCF4066BEY

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

14-DIP (0.300, 7.62mm)

Number of Pins

14

Weight

90.718474g

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

15 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

4000B

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

14

Type

Bilateral, FET Switches

Resistance

470Ohm

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

200mW

Voltage - Supply

3V~20V

Number of Functions

4

Supply Voltage

5V

Base Part Number

HCF4066

Output

SEPARATE OUTPUT

Pin Count

a count of all of the component leads (or pins)

14

Circuit

1 x 1:1

Polarity

Non-Inverting

Supply Voltage-Max (Vsup)

20V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

3/15V

Supply Voltage-Min (Vsup)

3V

Number of Channels

4

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

20nA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

200mW

Max Supply Current

5μA

Throw Configuration

SPST

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

40 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

70 ns

Supply Type

Dual, Single

Dual Supply Voltage

7.5V

Off-state Isolation-Nom

50 dB

Voltage Supply Source

A voltage source is a two-terminal device which can maintain a fixed voltage. An ideal voltage source can maintain the fixed voltage independent of the load resistance or the output current. However, a real-world voltage source cannot supply unlimited current. A voltage source is the dual of a current source.

Dual Supply

On-state Resistance Match-Nom

5Ohm

Drain to Source Resistance

240Ohm

Normal Position

NO

Height

5.1mm

Length

20mm

Width

7.1mm

REACH SVHC

Unknown

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free