STMicroelectronics AS21P2TLRQ

Lifecycle Status

ACTIVE (Last Updated: 7 months ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

10-UFQFN

Number of Pins

10

Weight

7.002332mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

13 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

ECCN Code

EAR99

Resistance

500mOhm

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1.12W

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Base Part Number

AS21P2

Number of Outputs

4

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

4.3V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

1.65V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

1.12W

Max Supply Current

200nA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

15 ns

Number of Inputs

2

Supply Type

Single

-3db Bandwidth

55MHz

On-State Resistance (Max)

500mOhm

Multiplexer/Demultiplexer Circuit

2:1

Current - Leakage (IS(off)) (Max)

20nA

Channel Capacitance (CS(off), CD(off))

5pF

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPDT

Switch Time (Ton, Toff) (Max)

65ns, 40ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

49pC

Channel-to-Channel Matching (ΔRon)

100m Ω

Voltage - Supply, Single (V+)

1.65V~4.3V

Height

500μm

Length

1.9mm

Width

1.5mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free