Skyworks Solutions Inc. AAT4614IJS-2-T1

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-TFSOJ (0.069, 1.75mm Width)

Number of Pins

8

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

100 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2008

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

Resistance

340mOhm

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

667mW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

J BEND

Number of Functions

1

Supply Voltage

5V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Pin Count

a count of all of the component leads (or pins)

8

Number of Outputs

1

Output Type

P-Channel

Max Output Current

The maximum current that can be supplied to the load.

2A

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5.5V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

5V

Interface

On/Off

Output Configuration

High Side

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

2A

Voltage - Supply (Vcc/Vdd)

Not Required

Max Supply Current

25μA

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

200 μs

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Min Input Voltage

2.4V

Max Input Voltage

5.5V

Ratio - Input:Output

1:1

Voltage - Load

2.4V~5.5V

Driver Number of Bits

1

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO

Output Peak Current Limit-Nom

1A

Rds On (Typ)

160m Ω

Built-in Protections

TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE

Features

Status Flag

Length

2mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant