Skyworks Solutions Inc. AAT4280AIJS-3-T1

Mounting Type

Surface Mount

Package / Case

8-TFSOJ (0.069, 1.75mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

8

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

Series

ASPM™

Published

2010

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

Resistance

120mOhm

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

714mW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

J BEND

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Reach Compliance Code

unknown

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

2.3A

Number of Outputs

1

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Output Type

P-Channel

Max Output Current

The maximum current that can be supplied to the load.

2.3A

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5.5V

Interface

On/Off

Analog IC - Other Type

SPST

Output Configuration

High Side

Voltage - Supply (Vcc/Vdd)

Not Required

Max Supply Current

1μA

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

150 μs

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Min Input Voltage

1.5V

Max Input Voltage

5.5V

Ratio - Input:Output

1:1

Voltage - Load

1.5V~5.5V

Rds On (Typ)

80m Ω

Features

Load Discharge, Slew Rate Controlled

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free