Sierra Wireless RC7611_1104921

Package / Case

0805 (2012 Metric)

Mounting Type

Surface Mount

Supplier Device Package

0805

Package

Tape & Reel (TR)

Mfr

KOA Speer Electronics, Inc.

Product Status

Active

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

SG73S-RT

Size / Dimension

0.079 L x 0.049 W (2.00mm x 1.25mm)

Tolerance

±1%

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±200ppm/°C

Resistance

1.18 kOhms

Composition

Thick Film

Power (Watts)

0.25W, 1/4W

Voltage - Supply

-

Frequency

-

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Memory Size

The memory capacity is the amount of data a device can store at any given time in its memory.

-

Data Rate

Data Rate is defined as the amount of data transmitted during a specified time period over a network. It is the speed at which data is transferred from one device to another or between a peripheral device and the computer. It is generally measured in Mega bits per second(Mbps) or Mega bytes per second(MBps).

150Mbps

Utilized IC / Part

RC7611

Protocol

BeiDou, Galileo, GLONASS, GPS, LTE

Power - Output

-

RF Family/Standard

Cellular, Navigation

Antenna Type

There are several different types of antennas in three broad categories: omni-directional, directional, and semi-directional.

Antenna Not Included

Sensitivity

-

Serial Interfaces

A serial interface is a communication interface between two digital systems that transmits data as a series of voltage pulses down a wire. Essentially, the serial interface encodes the bits of a binary number by their "temporal" location on a wire rather than their "spatial" location within a set of wires.

ADC, GPIO, I²C, UART, USB

Current - Receiving

-

Current - Transmitting

-

Modulation

-

Features

Anti-Sulfur, Automotive AEC-Q200, Moisture Resistant, Pulse Withstanding

Height Seated (Max)

0.024 (0.60mm)

Ratings

-