Sharp Microelectronics GP2S40J0000F

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Copper, Tin

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

PCB Mount

Number of Pins

4

Collector-Emitter Breakdown Voltage

35V

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-25°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

1997

JESD-609 Code

e2

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Terminal Finish

Tin/Copper (Sn/Cu)

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

5V VCE

Reach Compliance Code

unknown

Body Breadth

3 mm

Output Type

Phototransistor

Termination Type

SOLDER

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

100mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

20mA

Forward Current

Current which flows upon application of forward voltage.

20mA

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

50μs, 50μs

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

50μs

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.2V

Fall Time (Typ)

50 μs

Collector Emitter Voltage (VCEO)

35V

Max Collector Current

20mA

Sensing Distance

It is the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. (Normally, it is 70 to 80 % of the maximum operation distance.)

0.138 (3.5mm)

Reverse Breakdown Voltage

6V

Reverse Voltage

the voltage drop across the diode if the voltage at the cathode is more positive than the voltage at the anode

6V

Sensing Method

Reflective

Current - DC Forward (If) (Max)

50mA

Sensors/Transducers Type

LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE

Output Range

0.50-3mA

Measurement Range-Max

3 mm

Measurement Range-Min

3 mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free