SGMICRO SGM5200XTS38G/TR

Mounting Type

Surface Mount

Package / Case

2-SMD, No Lead

Package

Tape & Reel (TR)

Base Product Number

435F

Mfr

CTS-Frequency Controls

Product Status

Active

Signal to Noise Ratio

71.4 dB

Supplier Package

TSSOP

Polarity of Input Voltage

Unipolar

Number of ADCs

1

Digital Interface Type

Serial

Input Signal Type

Single-Ended

Digital Supply Support

Yes

Mounting

Surface Mount

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-20°C ~ 70°C

Series

435

Size / Dimension

0.197 L x 0.126 W (5.00mm x 3.20mm)

Type

MHz Crystal

Frequency

24.576 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±10ppm

Pin Count

a count of all of the component leads (or pins)

38

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

2.7 to 5.25 V

ESR (Equivalent Series Resistance)

40 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

10pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±10ppm

Input Type

Voltage/Current

Architecture

SAR

Resolution

12 Bit

Sampling Rate

often described in the context of signal processing as the number of samples per time.

1 Msps

Screening Level

Extended Industrial

Voltage Supply Source

A voltage source is a two-terminal device which can maintain a fixed voltage. An ideal voltage source can maintain the fixed voltage independent of the load resistance or the output current. However, a real-world voltage source cannot supply unlimited current. A voltage source is the dual of a current source.

Analog/Digital

Number of ADC Channels

16

Number of Analog Inputs

1

Voltage Reference

External

Typical Power Dissipation

24 mW

Height Seated (Max)

0.043 (1.10mm)

Ratings

-