Sensata-Crydom DLD2450

Mount

Chassis Mount, Panel, Screw

Mounting Type

Chassis Mount

Number of Pins

6

Series

DLD

Published

2008

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Not For New Designs

Moisture Sensitivity Level (MSL)

Not Applicable

Termination

Screw

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

80°C

Min Operating Temperature

-30°C

Voltage - Supply

3.5V~15VDC

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

50A

Termination Style

Screw Terminal, Quick Connect - 0.187 (4.7mm)

Function

On-Delay

Voltage - Rated AC

280V

Approval Agency

UL

Output Voltage

280V

Max Output Current

The maximum current that can be supplied to the load.

50A

Circuit

SPST-NO (1 Form A)

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

50A

Throw Configuration

SPST

Max Voltage Rating (DC)

15V

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

280V

Relay Type

Solid State Relay

Contact Rating @ Voltage

50A @ 280VAC

Input Current

11.4mA

Load Current

The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

50A

Delay Time

The amount of time by which the arrival of a signal is retarded after transmission through physical equipment or systems.

1.6 Sec ~ 133 Sec

Timing Adjustment Method

External Resistor

Timing Initiate Method

The initiation time (also known as release time) is the time at which the process goes from the waiting to the ready state. An aperiodic process is by definition initiated by an event, such as external data arriving or data computed by another process.

Input Voltage

Height

22.2mm

Length

58.4mm

Width

45.7mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free