Schneider 9007MS05S0082

Mount

Surface Mount

Mounting Type

Chassis Mount

RoHS

Compliant

Number of Elements

2

Package

Box

Mfr

Schneider Electric

Product Status

Active

Voltage Rating DC

The DC Voltage ratings are the AC voltage values times 1.41 (usually rounded).

28 V

ElectricalLife

-

Voltage Rating AC

In general the AC voltage assumes a 50-60 Hz sinusoidal waveform and is the RMS (root mean squared) value.

120 V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 104°C

Series

9007

Type

General Purpose

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85 °C

Min Operating Temperature

-40 °C

Current Rating (Amps)

6A (AC), 5A (DC)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

471 mW

Ingress Protection

Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

IP54 - Dust Protected, Water Resistant

Termination Style

Connector

Actuator Type

Spring, Wire

Output Type

TTL

Circuit

SPDT

Switch Function

This function will evaluate a given expression (or a value) against a list of values and will return a result corresponding to the first matching value. In case there is no matching value, an optional default value will be returned.

On-Mom

Number of Channels

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.25 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.7 V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

1 mA

Max Supply Current

1 mA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

820 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

500 µA

Mechanical Life

10,000,000 Cycles

Common Mode Rejection Ratio

90 dB

Operating Force

-

Input Offset Voltage (Vos)

2 mV

Overtravel

-

Differential Travel

The distance between the operating position and release or reset position of a limit switch actuator.

-

Pretravel

-

Operating Position

-

Release Force

The value to which the actuating force must be reduced in order to permit the switch to return to its normal position after operation.

-

Input Bias Current

100 nA

Hysteresis

4 mV

Features

-

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

Lead Free

Lead Free