Schmersal EX-BNS 33-12ZG-2187-3G/D-5M

Package / Case

Axial

Supplier Device Package

Axial

Housing Material

Plastic

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 200°C

Series

RSMF

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Box (TB)

Size / Dimension

0.126 Dia x 0.354 L (3.20mm x 9.00mm)

Tolerance

±5%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±200ppm/°C

Resistance

1.3 kOhms

Composition

Metal Oxide Film

Power (Watts)

1W

Supply Voltage

24 V dc, 100 V ac/dc

Depth

13mm

Actuator Type

Coded

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

--

Connection Type

Cable

Features

Flame Proof, Safety

Safety Category

4

Supply Current

Supply current refers to the input current to an LDO regulator at no load, which flows inside the IC in order to operate. The power consumption of an LDO regulator can be calculated as. (Input Voltage) x (Consumption current of IC itself) + (Input Voltage - Output Voltage) x (Load current)

10mA

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP67

Height Seated (Max)

--

Width

50mm

Length

88mm