FN7612-100-M8

Schaffner EMC, Inc. FN7612-100-M8

Part No:

FN7612-100-M8

Manufacturer:

Schaffner EMC, Inc.

Datasheet:

-

Package:

Axial - Threaded Terminals

AINNX NO:

32028363-FN7612-100-M8

Description:

Products specifications
  • Mounting Type
    Bolt Mount
  • Package / Case
    Axial - Threaded Terminals
  • EU RoHS
    Compliant
  • ECCN (US)
    EAR99
  • Automotive
    No
  • PPAP
    No
  • Package
    Bulk
  • Mfr
    Schaffner EMC Inc.
  • Product Status
    Active
  • Voltage Rated

    RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

    1000V (1kV)
  • Package Description
    ROHS COMPLIANT PACKAGE
  • Leakage Current-Max
    188 mA
  • Operating Temperature-Min
    -40 °C
  • Operating Temperature-Max
    100 °C
  • Rohs Code
    Yes
  • Manufacturer Part Number
    FN7612-100-M8
  • Approvals
    UL; ENEC-14
  • Manufacturer
    Schaffner
  • Part Life Cycle Code
    Active
  • Ihs Manufacturer
    SCHAFFNER HOLDING AG
  • Risk Rank
    5.68
  • Manufacturer Series
    FN761X
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 100°C
  • Series
    FN 761X
  • Size / Dimension
    -
  • Tolerance
    ±20%
  • Pbfree Code
    Yes
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    -
  • Terminal Finish
    NOT SPECIFIED
  • Additional Feature

    Any Feature, including a modified Existing Feature, that is not an Existing Feature.

    INDUCTANCE 124 MILLI HENRY
  • Capacitance
    1 µF
  • Reach Compliance Code
    compliant
  • Physical Dimension
    D41.0XH144.0 (mm)/D1.614XH5.669 (inch)
  • Operating Frequency

    Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.

    50/60Hz Hz
  • Current
    100 A
  • Filter Type
    AC FEED THROUGH CAPACITOR
  • Thread Size

    given in nominal sizes, not in the actual measurement.

    -
  • Rated Current
    100 A
  • DC Resistance (DCR) (Max)
    0.23mOhm (Typ)
  • Insertion Loss

    the loss of signal power resulting from the insertion of a device in a transmission line or optical fiber and is usually expressed in decibels (dB).

    -
  • Rated Voltage
    300 V
  • Insulation Resistance-Min
    15000 MΩ
  • High Pot
    3000 V
  • Height
    144 mm
  • Diameter
    41 mm
  • Height (Max)
    -
  • Ratings
    Y2
0 Similar Products Remaining