Schaffner EMC Inc. FN7512-63-M6

Factory Lead Time

10 Weeks

Mount

Through Hole

Package / Case

Axial - Threaded Terminals

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~100°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tray

Series

FN 751X

Published

2009

Size / Dimension

0.984Diax3.780L 25.00mmx96.00mm

Tolerance

±20%

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

Screw

Capacitance

0.1μF

Voltage - Rated DC

250V

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

63A

Voltage - Rated AC

250V

Approval Agency

UL; ENEC-14

Physical Dimension

D25.0XH30.0 (mm)/D0.984XH1.181 (inch)

Operating Frequency

Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.

50/60Hz Hz

Ripple Current

the pulsed current consumption of non-linear devices like capacitor-input rectifiers.

63A

Filter Type

AC FEED THROUGH CAPACITOR

Thread Size

given in nominal sizes, not in the actual measurement.

M16x1

DC Resistance (DCR) (Max)

0.3mOhm Typ

Rated Voltage

300V

Leakage Current (Max)

9.4mA

Insulation Resistance-Min

1500MOhm

High Pot

3000 V

Diameter

25mm

Height

30mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Ratings

Y2