ROHM Semiconductor BUS1DJC0GWZ-E2

Factory Lead Time

15 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

4-XFBGA

Number of Pins

4

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

25 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2014

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

4

ECCN Code

EAR99

Resistance

245mOhm

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

410mW

Terminal Position

BOTTOM

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

BALL

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Number of Functions

1

Supply Voltage

3.3V

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Base Part Number

BUS1DJC0GWZ

Number of Outputs

1

Output Type

P-Channel

Max Output Current

The maximum current that can be supplied to the load.

2A

Supply Voltage-Max (Vsup)

5V

Interface

On/Off

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

350mA

Output Configuration

High Side

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

2A

Voltage - Supply (Vcc/Vdd)

Not Required

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

32 μs

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

5V

Ratio - Input:Output

1:1

Voltage - Load

1.1V~5V

Output Peak Current Limit-Nom

2A

Rds On (Typ)

58m Ω

Built-in Protections

OVER CURRENT

Features

Load Discharge, Slew Rate Controlled

Length

0.8mm

Height Seated (Max)

0.35mm

Width

0.8mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free