ROHM Semiconductor BD6524HFV-TR

Factory Lead Time

10 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Copper, Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

6-SMD, Flat Lead Exposed Pad

Number of Pins

6

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

2 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-25°C~75°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2008

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Not For New Designs

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

6

Termination

SMD/SMT

ECCN Code

EAR99

Resistance

335mOhm

Applications

Portable Equipment

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

850mW

Voltage - Supply

3V~5.5V

Terminal Position

DUAL

Number of Functions

1

Supply Voltage

5V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Base Part Number

BD652*

Pin Count

a count of all of the component leads (or pins)

6

Number of Outputs

1

Output Voltage

5V

Max Output Current

The maximum current that can be supplied to the load.

500mA

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

5V

Supply Voltage-Min (Vsup)

3V

Number of Channels

1

Analog IC - Other Type

POWER SUPPLY SUPPORT CIRCUIT

Operating Supply Current

50μA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

510mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

500mA

Adjustable Threshold

NO

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

1 ms

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

6V

Max Input Voltage

5.5V

Supply Current-Max (Isup)

0.075mA

Height

750μm

Length

1.6mm

Width

2.6mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant