BD1020HFV-TR

ROHM Semiconductor BD1020HFV-TR

Part No:

BD1020HFV-TR

Manufacturer:

ROHM Semiconductor

Datasheet:

-

Package:

SOT-665

ROHS:

AINNX NO:

6131515-BD1020HFV-TR

Description:

SENSOR ANALOG -30C-100C 5HVSOF

Products specifications
  • Factory Lead Time
    10 Weeks
  • Contact Plating

    Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

    Copper, Tin
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    SOT-665
  • Number of Pins
    5
  • Test Conditions
    30°C (-30°C ~ 100°C)
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -30°C~100°C
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tape & Reel (TR)
  • Published
    2008
  • JESD-609 Code
    e3
  • Pbfree Code
    yes
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    6
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    NEGATIVE ppm/°C
  • Terminal Finish
    Tin (Sn)
  • Max Power Dissipation

    The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

    536mW
  • Voltage - Supply
    2.4V~5.5V
  • Body Length or Diameter
    1.6mm
  • Body Breadth
    1.6 mm
  • Output Type
    Analog Voltage
  • Power Supplies

    an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

    3V
  • Interface
    2-Wire, Serial
  • Termination Type
    SOLDER
  • Operating Supply Current
    4μA
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    1mA
  • Resolution
    8.2mV/°C
  • Sensor Type
    Analog, Local
  • Output Voltage-Max
    1.312V
  • Output Voltage-Min
    1.288V
  • Sensors/Transducers Type
    TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT
  • Max Supply Voltage (DC)
    5.5V
  • Min Supply Voltage (DC)
    2.4V
  • Accuracy - Highest (Lowest)
    ±1.5°C (±2.5°C)
  • Sensing Temperature - Local
    -30°C~100°C
  • Body Height
    0.6mm
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining