Richtek RT9614AGQW

Mounting Type

Surface Mount

Package / Case

8-WDFN Exposed Pad

Supplier Device Package

8-WDFN (3x3)

Package

Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;

Mfr

Richtek USA Inc.

Product Status

Active

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+ 85 C

Supply Voltage-Max

13.2 V

Minimum Operating Temperature

- 40 C

Supply Voltage-Min

4.5 V

Mounting Styles

SMD/SMT

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 85°C (TA)

Series

-

Type

High-Side, Low-Side

Function

Step-Down

Number of Outputs

1

Output Type

Transistor Driver

Configuration

Non-Inverting

Output Configuration

Positive

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

2.2 A

Voltage - Supply (Vcc/Vdd)

4.5V ~ 13.5V

Control Features

Current Limit, Dead Time Control, Enable, Frequency Control, Phase Control, Power Good, Soft Start

Topology

Buck

Frequency - Switching

Up to 500kHz

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

25 ns

Synchronous Rectifier

Synchronous rectification is a technique for improving the efficiency of rectification by replacing diodes with actively controlled switches, usually power MOSFETs or power bipolar junction transistors (BJT).

Yes

Number of Drivers

2 Driver

Duty Cycle (Max)

-

Serial Interfaces

A serial interface is a communication interface between two digital systems that transmits data as a series of voltage pulses down a wire. Essentially, the serial interface encodes the bits of a binary number by their "temporal" location on a wire rather than their "spatial" location within a set of wires.

-

Clock Sync

Clock synchronization is a topic in computer science and engineering that aims to coordinate otherwise independent clocks. Even when initially set accurately, real clocks will differ after some amount of time due to clock drift, caused by clocks counting time at slightly different rates.

No

Output Phases

1

Product

MOSFET Gate Drivers