NNCD6.8F-T1B-AT

Renesas NNCD6.8F-T1B-AT

Part No:

NNCD6.8F-T1B-AT

Manufacturer:

Renesas

Datasheet:

-

Package:

TO-236-3, SC-59, SOT-23-3

AINNX NO:

28790194-NNCD6.8F-T1B-AT

Category:

TVS - Diodes

Description:

NNCD6.8F-T1B-AT - ELECTROSTATIC

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    TO-236-3, SC-59, SOT-23-3
  • Surface Mount

    having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

    YES
  • Supplier Device Package
    SC-59
  • Mfr
    Renesas
  • Package
    Bulk
  • Product Status
    Obsolete
  • Manufacturer Package Code
    PLSP0003ZD-A3
  • Rohs Code
    Yes
  • Manufacturer Part Number
    NNCD6.8F-T1B-AT
  • Manufacturer
    Renesas Electronics Corporation
  • Part Life Cycle Code
    Obsolete
  • Ihs Manufacturer
    RENESAS ELECTRONICS CORP
  • Breakdown Voltage-Nom
    6.8 V
  • Risk Rank
    5.84
  • Part Package Code
    MM
  • Series
    -
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    150°C (TJ)
  • Pbfree Code
    Yes
  • ECCN Code
    EAR99
  • Type
    Zener
  • Applications
    General Purpose
  • HTS Code

    HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

    8541.10.00.50
  • Subcategory
    Transient Suppressors
  • Reach Compliance Code
    compliant
  • Pin Count

    a count of all of the component leads (or pins)

    3
  • Brand Name
    Renesas
  • Polarity
    UNIDIRECTIONAL
  • Diode Type
    TRANS VOLTAGE SUPPRESSOR DIODE
  • Power Line Protection

    During fault, the only circuit breaker closest to the fault point should be tripped. The operating time of relay associated with protection of line should be as minimum as possible in order to prevent unnecessary tripping of circuit breakers associated with other healthy parts of power system.

    No
  • Voltage - Breakdown (Min)
    6.47V
  • Power - Peak Pulse
    100W
  • Current - Peak Pulse (10/1000μs)
    -
  • Voltage - Clamping (Max) @ Ipp
    -
  • Voltage - Reverse Standoff (Typ)
    3.5V (Max)
  • Unidirectional Channels
    2
  • Capacitance @ Frequency
    110pF @ 1MHz
0 Similar Products Remaining