Renesas ISL68233IRAZ

Package / Case

Module

Mounting Type

Surface Mount

Supplier Device Package

40-TQFN (5x5)

Material - Body

Polybutylene Terephthalate (PBT)

Package

Box

Mfr

Schneider Electric

Product Status

Active

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-25°C ~ 70°C

Series

XS

Voltage - Supply

12V ~ 24V

Shielding

Unshielded

Ingress Protection

Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

IP68

Termination Style

Cable

Function

Step-Down

Number of Outputs

2

Output Type

NO, 2-Wire

Output Configuration

Positive

Voltage - Supply (Vcc/Vdd)

3.135V ~ 3.465V

Topology

Buck

Frequency - Switching

200kHz ~ 2MHz

Synchronous Rectifier

Synchronous rectification is a technique for improving the efficiency of rectification by replacing diodes with actively controlled switches, usually power MOSFETs or power bipolar junction transistors (BJT).

No

Sensing Distance

It is the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. (Normally, it is 70 to 80 % of the maximum operation distance.)

0.197 (5mm)

Sensor Type

Inductive

Indicator

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

LED

Duty Cycle (Max)

-

Response Frequency

In electronics, frequency response is the quantitative measure of the output spectrum of a system or device in response to a stimulus, and is used to characterize the dynamics of the system. It is a measure of magnitude and phase of the output as a function of frequency, in comparison to the input.

-

Clock Sync

Clock synchronization is a topic in computer science and engineering that aims to coordinate otherwise independent clocks. Even when initially set accurately, real clocks will differ after some amount of time due to clock drift, caused by clocks counting time at slightly different rates.

Yes

Output Phases

5