Renesas F6121AVGI

Package / Case

01005 (0402 Metric)

Mounting Type

Surface Mount

Supplier Device Package

1005

Package

Bulk

Mfr

Stackpole Electronics Inc

Product Status

Active

Base Product Number

F6121

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 125°C

Series

RMCF

Size / Dimension

0.016 L x 0.008 W (0.40mm x 0.20mm)

Tolerance

±1%

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±300ppm/°C

Resistance

23.2 Ohms

Composition

Thick Film

Applications

General Purpose

Power (Watts)

0.03W, 1/32W

Voltage - Supply

2.1V ~ 2.5V

Frequency

10.7GHz ~ 12.75GHz

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Memory Size

The memory capacity is the amount of data a device can store at any given time in its memory.

-

Data Interface

A Data Interface in EDQ is a template of a set of attributes representing a given entity, used to create processes that read from, or write to, interfaces rather than directly from or to sources or targets of data.

SPI

Sensitivity

-

Data Rate (Max)

-

Current - Receiving

-

Modulation or Protocol

Modulation is the process of converting data into radio waves by adding information to an electronic or optical carrier signal. A carrier signal is one with a steady waveform -- constant height, or amplitude, and frequency.

-

Antenna Connector

An antenna connector is a radio frequency connector that is located at the termination of an antenna. Its attachment to the antenna provides a conduit for the transmission of radio frequency signals with signal loss, discontinuity, and impedance mismatches kept to a strict minimum.

-

Features

Automotive AEC-Q200

Height Seated (Max)

0.006 (0.15mm)

Ratings

AEC-Q200