Rectron MMSZ5252BS

Lifecycle Status

Production (Last Updated: 5 months ago)

Number of Terminals

2

Number of Elements

1

Reverse Stand-off Voltage

18 V

RoHS

Compliant

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150 °C

Min Operating Temperature

-55 °C

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

200 mW

Polarity

Unidirectional

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

33 Ω

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

24 V

Peak Reverse Current

The maximum voltage that a diode can withstand in the reverse direction without breaking down or avalanching.If this voltage is exceeded the diode may be destroyed. Diodes must have a peak inverse voltage rating that is higher than the maximum voltage that will be applied to them in a given application.

100 nA

Voltage Tolerance

The voltage tolerance level for the electrical auxiliaries is defined by the standard. The maximum and minimum nominal voltages are defined by the tolerance level.

5 %

Zener Current

Zener/Breakdown Voltage – The Zener or the reverse breakdown voltage?ranges from 2.4 V to 2 V, sometimes it can go up to 1 kV while the maximum for the surface-mounted device is 47 V. ... It is given by the product of the voltage of the diode and the current flowing through it.

5.2 mA

REACH SVHC

Yes