Pulse B2210

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Terminal Shape

GULL WING

Shape/Size Description

RECTANGULAR PACKAGE

Number of Terminals

6

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Operating Temperature-Min

-40 °C

Operating Temperature-Max

85 °C

DC Resistance

9 Ω

Manufacturer Part Number

B2210

Manufacturer

Pulse Electronics Corporation

Part Life Cycle Code

Active

Ihs Manufacturer

PULSE ELECTRONICS CORP

Risk Rank

5.3

Manufacturer Series

B2210

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 85°C

Series

SXT324

Size / Dimension

0.126 L x 0.098 W (3.20mm x 2.50mm)

Tolerance

7%

ECCN Code

EAR99

Type

MHz Crystal

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8504.50.80.00

Number of Functions

2

Reach Compliance Code

compliant

Frequency

50 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±50ppm

ESR (Equivalent Series Resistance)

35 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

8pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Inductor Application

FILTER CHOKE

Terminal Placement

DUAL IN-LINE

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±10ppm

Inductor Type

GENERAL PURPOSE INDUCTOR

Shielded

NO

Inductance-Nom (L)

455 µH

Height Seated (Max)

0.031 (0.80mm)

Ratings

-