Power Integrations TOP247YN

Factory Lead Time

6 Weeks

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

TO-220-7 (Formed Leads), 6 Leads

Number of Pins

6

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

TOPSwitch®-GX

Published

2004

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Not For New Designs

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

6

ECCN Code

EAR99

Terminal Finish

Matte Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

165W

Terminal Position

ZIG-ZAG

Number of Functions

1

Frequency

132kHz

Pin Count

a count of all of the component leads (or pins)

3

Number of Outputs

1

Output Voltage

700V

Output Type

Adjustable

Max Output Current

The maximum current that can be supplied to the load.

5.76A

Analog IC - Other Type

SWITCHING REGULATOR

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2.2mA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

5.76A

Control Features

Frequency Control

Topology

Flyback

Control Mode

VOLTAGE-MODE

Frequency - Switching

66kHz~132kHz

Control Technique

PULSE WIDTH MODULATION

Switcher Configuration

SINGLE

Internal Switch(s)

Yes

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting, Over Temperature, Over Voltage

Max Duty Cycle

83 %

Max Supply Voltage (AC)

265V

Drain to Source Resistance

1.95Ohm

Duty Cycle

the percentage of the ratio of pulse duration, or pulse width (PW) to the total period (T) of the waveform.

66.5%

Output Isolation

Isolated

Min Supply Voltage (AC)

85V

Length

10.54mm

Width

4.7mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free