Panasonic Electronic Components DE3S062D0L

Factory Lead Time

10 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

SC-89, SOT-490

Number of Pins

3

Diode Element Material

SILICON

Number of Elements

2

Reverse Stand-off Voltage

4V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e6

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Discontinued

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

3

ECCN Code

EAR99

Type

Zener

Terminal Finish

Tin/Bismuth (Sn/Bi)

Applications

General Purpose

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8541.10.00.50

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

150mW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

FLAT

Base Part Number

DE3S062

Pin Count

a count of all of the component leads (or pins)

3

Polarity

UNIDIRECTIONAL

Element Configuration

The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.

Common Anode

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

150mW

Power Line Protection

During fault, the only circuit breaker closest to the fault point should be tripped. The operating time of relay associated with protection of line should be as minimum as possible in order to prevent unnecessary tripping of circuit breakers associated with other healthy parts of power system.

No

Voltage - Breakdown (Min)

5.89V

Max Reverse Leakage Current

1μA

Clamping Voltage

6.51V

Test Current

1mA

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

6.2V

Unidirectional Channels

2

Zener Voltage

6.51V

Voltage Tol-Max

5%

Peak Reverse Current

The maximum voltage that a diode can withstand in the reverse direction without breaking down or avalanching.If this voltage is exceeded the diode may be destroyed. Diodes must have a peak inverse voltage rating that is higher than the maximum voltage that will be applied to them in a given application.

1μA

Capacitance @ Frequency

55pF @ 1MHz

Zener Current

Zener/Breakdown Voltage – The Zener or the reverse breakdown voltage?ranges from 2.4 V to 2 V, sometimes it can go up to 1 kV while the maximum for the surface-mounted device is 47 V. ... It is given by the product of the voltage of the diode and the current flowing through it.

1mA

Height

600μm

Length

1.6mm

Width

850μm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free