Panasonic Electric Works APT1221A

Factory Lead Time

10 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

4-SMD, Gull Wing

Number of Pins

4

Current-Hold(Ih)

3.5mA

Current-LED Trigger(Ift)(Max)

10mA

Number of Elements

1

Zero-Crossing Circuit

No

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~100°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

APT

Published

2000

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

500mW

Approval Agency

cUR, VDE

Voltage - Isolation

5000Vrms

Output Voltage

600V

Output Type

Triac

Max Output Current

The maximum current that can be supplied to the load.

100mA

Number of Channels

1

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

100mA

Voltage - Forward (Vf) (Typ)

1.21V

Throw Configuration

SPST

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

100 μs

Forward Current

Current which flows upon application of forward voltage.

50mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

600V

Max Input Voltage

1.3V

RMS Current (Irms)

100mA

Hold Current

the minimum current which must pass through a circuit in order for it to remain in the 'ON' state.

3.5mA

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

100μs (Max)

Input Current

20mA

Load Current

The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

100mA

Static dV/dt (Min)

500V/μs

On-State Voltage-Max

2.5V

Input Trigger Current-Nom

10mA

Height

2.7mm

Length

4.78mm

Width

6.4mm

REACH SVHC

Unknown

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free