NLSF595MNR2G
16-VFQFN Exposed Pad
3135428-NLSF595MNR2G
IC LED DRIVER LINEAR 12MA 16QFN
Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.
The center distance from one pole to the next.
Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.
a count of all of the component leads (or pins)
In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.
The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.
Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.
the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.
The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.
The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.
The maximum output power = the maximum output current × the rated output voltage
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.