ON Semiconductor MC10EL16DR2G

Lifecycle Status

ACTIVE (Last Updated: 6 hours ago)

Factory Lead Time

11 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Interface Standards

GENERAL PURPOSE

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

10EL

Published

2006

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

Termination

SMD/SMT

ECCN Code

EAR99

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

NECL MODE: VCC=0 VEE=-4.2 TO -5.7

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

4.2V~5.7V

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

10EL16

Pin Count

a count of all of the component leads (or pins)

8

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

+-5V

Number of Circuits

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.7V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4.2V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

22mA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

50mA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

250 ps

Logic Function

Receiver

Max Input Voltage

4.19V

Halogen Free

Halogen Free

Logic Type

Differential Receiver

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

190ps

Differential Output

a differential output voltage in electronics is the difference between the values of two AC voltages, 180° out of phase, present at the output terminals of an amplifier when you apply a differential input voltage to the input terminals of an amplifier.

YES

Receiver Number of Bits

1

Receive Delay-Max

0.325 ns

Negative Supply Voltage-Nom

-5V

Length

4.9mm

Width

3.9mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free