ON Semiconductor FSL136HRLX

Lifecycle Status

ACTIVE (Last Updated: 1 day ago)

Factory Lead Time

8 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SMD, Gull Wing

Number of Pins

8

Weight

710mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

20 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~105°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

FPS™

Published

2016

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

8

ECCN Code

EAR99

Resistance

3.5Ohm

Terminal Finish

Tin (Sn)

Power (Watts)

26W

Power Rating

19W

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1.5W

Terminal Position

DUAL

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Base Part Number

FSL136

Number of Outputs

1

Analog IC - Other Type

SWITCHING CONTROLLER

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2.5mA

Current

1.8A

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

1.5W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

3A

Voltage - Supply (Vcc/Vdd)

8V~26V

Max Supply Current

3.5mA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

12 ns

Topology

Flyback

Control Mode

CURRENT-MODE

Frequency - Switching

100kHz

Max Output Power

The maximum output power = the maximum output current × the rated output voltage

20W

Internal Switch(s)

Yes

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit

Max Duty Cycle

83 %

Duty Cycle

the percentage of the ratio of pulse duration, or pulse width (PW) to the total period (T) of the waveform.

77%

Output Isolation

Isolated

Voltage - Start Up

12V

Min Breakdown Voltage

650V

Height

3.6mm

Length

9.4mm

Width

6.6mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant