ON Semiconductor 1N4004

Lifecycle Status

LAST SHIPMENTS (Last Updated: 1 day ago)

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

DO-204AL, DO-41, Axial

Number of Pins

2

Supplier Device Package

DO-204AL (DO-41)

Weight

245mg

Manufacturer Package Identifier

MKT-DO41A

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2005

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

175°C

Min Operating Temperature

-55°C

Capacitance

15pF

Voltage - Rated DC

400V

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

1A

Base Part Number

1N4004

Polarity

Standard

Element Configuration

The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.

Single

Speed

Standard Recovery >500ns, > 200mA (Io)

Diode Type

Standard

Current - Reverse Leakage @ Vr

5μA @ 400V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

3W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1A

Voltage - Forward (Vf) (Max) @ If

1.1V @ 1A

Forward Current

Current which flows upon application of forward voltage.

1A

Operating Temperature - Junction

-55°C~175°C

Max Surge Current

Surge current is a peak non repetitive current. Maximum (peak or surge) forward current = IFSM or if(surge), the maximum peak amount of current the diode is able to conduct in forward bias mode.

30A

Voltage - DC Reverse (Vr) (Max)

400V

Current - Average Rectified (Io)

1A

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.1V

Max Reverse Voltage (DC)

400V

Average Rectified Current

Mainly used to characterize alternating voltage and current. It can be computed by averaging the absolute value of a waveform over one full period of the waveform.

1A

Peak Reverse Current

The maximum voltage that a diode can withstand in the reverse direction without breaking down or avalanching.If this voltage is exceeded the diode may be destroyed. Diodes must have a peak inverse voltage rating that is higher than the maximum voltage that will be applied to them in a given application.

5μA

Max Repetitive Reverse Voltage (Vrrm)

400V

Capacitance @ Vr, F

15pF @ 4V 1MHz

Peak Non-Repetitive Surge Current

30A

Reverse Voltage

the voltage drop across the diode if the voltage at the cathode is more positive than the voltage at the anode

400V

Max Forward Surge Current (Ifsm)

30A

Diameter

2.72mm

Height

5.2mm

Length

5.2mm

Width

6.35mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free