OMC LMMR1

Package / Case

Axial

Supplier Device Package

Axial

RoHS

Compliant

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 175°C

Series

CMF

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Size / Dimension

0.090 Dia x 0.240 L (2.29mm x 6.10mm)

Tolerance

±1%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±50ppm/°C

Resistance

127 Ohms

Composition

Metal Film

Power (Watts)

0.5W, 1/2W

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

--

Viewing Angle

the angle at which a display can be viewed with acceptable visual performance.

120 °

Illumination Color

Red

Power Consumption

Power consumption is the amount of input energy (measured in watts) required for an electrical appliance to function. This is opposed to power output which is a measure of the level of performance, of a heat pump for example.

250 mW

Features

Flame Retardant Coating, Moisture Resistant, Safety

Input Power

-

Input Voltage

12VDC

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP67

Height Seated (Max)

--

Width

18 mm

REACH SVHC

No SVHC

Ratings

IP67