74HCT126N

NXP Semiconductors / Freescale 74HCT126N

Part No:

74HCT126N

Package:

PDIP

ROHS:

AINNX NO:

12214611-74HCT126N

Description:

Buffers & Line Drivers QUAD 3-STATE BUS BUF

Products specifications
  • Mount
    Surface Mount
  • Package / Case
    PDIP
  • Number of Pins
    14
  • JESD-609 Code
    e4
  • Pbfree Code
    yes
  • Number of Terminations
    14
  • Terminal Finish
    NICKEL PALLADIUM GOLD
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    125°C
  • Min Operating Temperature
    -40°C
  • Terminal Position
    DUAL
  • Terminal Form

    Occurring at or forming the end of a series, succession, or the like; closing; concluding.

    THROUGH-HOLE
  • Peak Reflow Temperature (Cel)
    NOT SPECIFIED
  • Number of Functions
    4
  • Supply Voltage
    5V
  • Time@Peak Reflow Temperature-Max (s)
    NOT SPECIFIED
  • Pin Count

    a count of all of the component leads (or pins)

    14
  • Qualification Status

    An indicator of formal certification of qualifications.

    Not Qualified
  • Polarity
    Non-Inverting
  • Power Supplies

    an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

    5V
  • Temperature Grade

    Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

    AUTOMOTIVE
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    5.5V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    4.5V
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    50pF
  • Number of Ports

    A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

    2
  • Number of Bits
    1
  • Propagation Delay

    the flight time of packets over the transmission link and is limited by the speed of light.

    24 ns
  • Family
    HCT
  • Logic Function
    Buffer
  • Output Characteristics
    3-STATE
  • Logic IC Type
    BUS DRIVER
  • Max I(ol)
    0.006 A
  • Prop. Delay@Nom-Sup
    36 ns
  • High Level Output Current

    High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

    -6mA
  • Low Level Output Current

    The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

    6mA
  • Control Type
    ENABLE HIGH
  • Number of Input Lines
    4
  • Length
    19.025mm
  • Width
    7.62mm
  • REACH SVHC
    No SVHC
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    RoHS Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for NXP Semiconductors / Freescale 74HCT126N.