NTE Electronics, Inc. NTE987

Mount

Through Hole

Package / Case

DIP

Number of Pins

14

Weight

72.574779g

ECCN Code

EAR99

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

70°C

Min Operating Temperature

0°C

Terminal Position

DUAL

Number of Functions

4

Supply Voltage

5V

Pin Count

a count of all of the component leads (or pins)

14

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

COMMERCIAL

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

32V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

3V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

3mA

Current - Output

40mA

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio

65 dB

Current - Input Bias

-90nA

Max Input Voltage

28.3V

Input Offset Voltage (Vos)

2mV

Average Bias Current-Max (IIB)

0.5μA

Power Supply Rejection Ratio (PSRR)

65dB

Low-Offset

NO

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

16V

Low-Bias

NO

Micropower

the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

YES

Min Dual Supply Voltage

1.5V

Bias Current-Max (IIB) @25C

0.25μA

Programmable Power

A programmable power supply provides remote control capability of the output voltage(s) via an analog control signal controlled by keypad or rotary switch from the front panel of the power supply or via a computer interface such as RS232, GPIB, or USB.

NO

Wideband

NO

Voltage Gain-Min

15000

Number of Amplifiers

4

Width

76.2mm

Height

12.7mm

Length

19.95mm

REACH SVHC

Unknown

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant