All Products
- Contact Plating
Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.
Gold - MountBulkhead, Flanges, Front Side Nut, Panel
- Mounting TypeThrough Hole
- Package / CaseHC-49/U
- Voltage, Rating600 V
- Contact MaterialsBrass
- RoHSCompliant
- Manufacturer Part NumberNTE652
- ManufacturerNTE Electronics
- PackageBag
- MfrNTE Electronics, Inc
- Product StatusActive
- Packaging
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Bulk - Operating Temperature
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
-20°C ~ 70°C - SeriesNTE652
- Size / Dimension0.435 L x 0.183 W (11.05mm x 4.65mm)
- TerminationSolder
- Connector TypeReceptacle
- TypeMHz Crystal
- Number of Positions18
- Max Operating Temperature
The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
115 °C - Min Operating Temperature-40 °C
- ColorBlack
- Fastening Type
There are 5 Main Types of Fastening Type: Screws, Nails, Bolts, Anchors, Rivets.
Bayonet - OrientationStraight
- Depth6.7 mm
- Current Rating
Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.
23 A - Frequency4 MHz
- Frequency Stability
the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.
±50ppm - Contact GenderMale
- ESR (Equivalent Series Resistance)100 Ohms
- Load Capacitance
the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.
Series - Wire Gauge (Max)20 AWG
- Wire Gauge (Min)24 AWG
- Operating Mode
A phase of operation during the operation and maintenance stages of the life cycle of a facility.
Fundamental - Frequency Tolerance
the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.
±30ppm - Height Seated (Max)0.500 (12.70mm)
- RatingsIP67