25-B610-03

NTE ELECT 25-B610-03

Part No:

25-B610-03

Manufacturer:

NTE ELECT

Datasheet:

-

Package:

0805 (2012 Metric)

AINNX NO:

46100040-25-B610-03

Description:

TERMNAL BLOCK, BARRIER 11MM PITC

Products specifications
  • Package / Case
    0805 (2012 Metric)
  • Mounting Type
    Chassis, Panel
  • Supplier Device Package
    0705
  • Material - Insulation
    -
  • Terminal Screw Material
    -
  • Package
    Tray
  • Base Product Number
    M55342
  • Mfr
    Vishay Dale Thin Film
  • Product Status
    Active
  • Voltage, Rating
    300V
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -55°C ~ 150°C
  • Series
    Military, MIL-PRF-55342, RM0705
  • Size / Dimension
    0.080 L x 0.050 W (2.03mm x 1.27mm)
  • Tolerance
    ±1%
  • Number of Terminations
    2
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    ±50ppm/°C
  • Resistance
    110 Ohms
  • Composition
    Thin Film
  • Color
    Black
  • Number of Rows
    2
  • Power (Watts)
    0.15W
  • Current Rating (Amps)
    20A
  • Pitch
    0.433 (11.00mm)
  • Failure Rate

    the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

    R (0.01%)
  • Wire Gauge

    a measurement of?wire?diameter.?This determines the amount of electric current the wire can safely carry, as well as its electrical resistance and weight.

    10-18 AWG
  • Number of Circuits
    3
  • Terminal Block Type

    A terminal block is a component with an insulated frame that has the sole purpose of securing two or more wires together,e.g., pin-type, tubular, hook type, fork type.

    Barrier Block
  • Bottom Termination
    Closed
  • Barrier Type
    2 Wall (Dual)
  • Top Termination
    Screws with Quick Connect Tabs
  • Terminal Screw Finish
    -
  • Number of Wire Entries
    3
  • Features
    Military, Non-Inductive
  • Height Seated (Max)
    0.033 (0.84mm)
  • Material Flammability Rating
    -
0 Similar Products Remaining