Nexperia USA Inc. PMV30UN2R

Factory Lead Time

4 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

TO-236-3, SC-59, SOT-23-3

Number of Pins

3

Transistor Element Material

SILICON

Current - Continuous Drain (Id) @ 25℃

4.2A Ta

Drive Voltage (Max Rds On, Min Rds On)

1.2V 4.5V

Number of Elements

1

Power Dissipation (Max)

490mW Ta 5W Tc

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

35 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

Published

1997

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

3

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Pin Count

a count of all of the component leads (or pins)

3

Configuration

SINGLE WITH BUILT-IN DIODE

Number of Channels

1

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

ENHANCEMENT MODE

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

1W

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

7 ns

FET Type

N-Channel

Transistor Application

SWITCHING

Rds On (Max) @ Id, Vgs

32m Ω @ 4.2A, 4.5V

Vgs(th) (Max) @ Id

900mV @ 250μA

Input Capacitance (Ciss) (Max) @ Vds

655pF @ 10V

Gate Charge (Qg) (Max) @ Vgs

11nC @ 4.5V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

26ns

Vgs (Max)

±12V

Fall Time (Typ)

10 ns

Continuous Drain Current (ID)

4.2A

Threshold Voltage

650mV

Gate to Source Voltage (Vgs)

12V

Drain to Source Breakdown Voltage

20V

Max Junction Temperature (Tj)

150°C

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

150°C

Height

1.1mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free