Nexperia USA Inc. PMV250EPEAR

Factory Lead Time

4 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

TO-236-3, SC-59, SOT-23-3

Number of Pins

3

Transistor Element Material

SILICON

Current - Continuous Drain (Id) @ 25℃

1.5A Ta

Drive Voltage (Max Rds On, Min Rds On)

4.5V 10V

Number of Elements

1

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

26 ns

Power Dissipation (Max)

480mW Ta 6.25W Tc

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Published

2014

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

3

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

LOGIC LEVEL COMPATIBLE

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Pin Count

a count of all of the component leads (or pins)

3

Configuration

SINGLE WITH BUILT-IN DIODE

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

ENHANCEMENT MODE

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

4 ns

FET Type

P-Channel

Transistor Application

SWITCHING

Rds On (Max) @ Id, Vgs

240m Ω @ 1.3A, 10V

Vgs(th) (Max) @ Id

2.5V @ 250μA

Input Capacitance (Ciss) (Max) @ Vds

450pF @ 20V

Gate Charge (Qg) (Max) @ Vgs

6nC @ 10V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

6ns

Drain to Source Voltage (Vdss)

40V

Vgs (Max)

±20V

Fall Time (Typ)

14 ns

Continuous Drain Current (ID)

1.5A

Gate to Source Voltage (Vgs)

20V

Drain-source On Resistance-Max

0.24Ohm

DS Breakdown Voltage-Min

40V

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free