Nexperia USA Inc. BCM857DS,115

Factory Lead Time

4 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

SC-74, SOT-457

Number of Pins

6

Supplier Device Package

6-TSOP

Weight

4.535924g

Collector-Emitter Breakdown Voltage

-45V

Current-Collector (Ic) (Max)

100mA

Number of Elements

2

hFEMin

200

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2008

Tolerance

0.002%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Resistance

50Ohm

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150°C

Min Operating Temperature

-65°C

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

380mW

Frequency

16MHz

Base Part Number

BCM857

ESR (Equivalent Series Resistance)

50Ohm

Polarity

PNP

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

18pF

Element Configuration

The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.

Dual

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

380mW

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

0.002%

Power - Max

380mW

Test Current

5mA

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

175MHz

Zener Voltage

3.3V

Transistor Type

2 PNP (Dual) Matched Pair

Collector Emitter Voltage (VCEO)

-45V

Max Collector Current

-100mA

DC Current Gain (hFE) (Min) @ Ic, Vce

200 @ 2mA 5V

Current - Collector Cutoff (Max)

15nA ICBO

Vce Saturation (Max) @ Ib, Ic

400mV @ 5mA, 100mA

Voltage - Collector Emitter Breakdown (Max)

45V

Max Breakdown Voltage

45V

Frequency - Transition

175MHz

Collector Base Voltage (VCBO)

-50V

Emitter Base Voltage (VEBO)

-5V

Max Junction Temperature (Tj)

150°C

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

150°C

Height

1.1mm

Length

5mm

Width

3.2mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free