Nexperia USA Inc. 74LVC574APW,118

Factory Lead Time

4 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

20-TSSOP (0.173, 4.40mm Width)

Number of Pins

20

Clock-Edge Trigger Type

Positive Edge

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

74LVC

JESD-609 Code

e4

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

20

Type

D-Type

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Voltage - Supply

1.65V~3.6V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Supply Voltage

2.7V

Terminal Pitch

The center distance from one pole to the next.

0.65mm

Base Part Number

74LVC574

Function

Standard

Output Type

Tri-State, Non-Inverted

Polarity

Non-Inverting

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

2

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

32mA

Number of Bits

8

Clock Frequency

200MHz

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

3.2 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

9 ns

Family

LVC/LCX/Z

Logic Function

D-Type, Flip-Flop

Current - Quiescent (Iq)

10μA

Number of Inputs

3

Max Propagation Delay @ V, Max CL

7ns @ 3.3V, 50pF

Trigger Type

Positive Edge

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

5pF

Number of Input Lines

8

Length

6.5mm

Width

4.4mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free