Nexperia USA Inc. 74HC4051PW-Q100,11

Factory Lead Time

4 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

16-TSSOP (0.173, 4.40mm Width)

Number of Pins

16

Weight

172.98879mg

Usage Level

Automotive grade

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

Automotive, AEC-Q100

Published

1999

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Resistance

140Ohm

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

500mW

Base Part Number

74HC4051

Pin Count

a count of all of the component leads (or pins)

16

Number of Circuits

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

10V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2V

Operating Supply Current

16μA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

500mW

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

90 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

60 ns

Logic Function

Demultiplexer, Multiplexer

Voltage - Supply, Single/Dual (±)

2V~10V ±1.5V~5V

Supply Type

Dual, Single

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

5V

-3db Bandwidth

180MHz

On-State Resistance (Max)

120Ohm

Min Dual Supply Voltage

1V

Dual Supply Voltage

2.5V

Multiplexer/Demultiplexer Circuit

8:1

Current - Leakage (IS(off)) (Max)

400nA

Channel Capacitance (CS(off), CD(off))

3.5pF

Switch Time (Ton, Toff) (Max)

51ns, 42ns

Number of Output Lines

8

Channel-to-Channel Matching (ΔRon)

6 Ω

Drain to Source Resistance

180Ohm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant