Nexperia 74HCT85N

Package / Case

DIP

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Number of Pins

16

Published

2013

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Discontinued

Number of Terminations

16

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125°C

Min Operating Temperature

-40°C

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

CASCADABLE

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

THROUGH-HOLE

Number of Functions

1

Supply Voltage

5V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

AUTOMOTIVE

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4.5V

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

50pF

Number of Bits

4

Family

HCT

Output Polarity

TRUE

Logic IC Type

MAGNITUDE COMPARATOR

Number of Gates

The number of gates per IC varies depending on the number of inputs per gate. Two?input gates are common, but if only a single input is required, such as in the 744 NOT(or inverter) gates, a 14 pin IC can accommodate 6 (or Hex) gates.

1

Propagation Delay (tpd)

66 ns

Height Seated (Max)

5.08mm

Width

7.62mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free