Nexperia 74HCT139N

Mount

Through Hole

Number of Pins

16

Number of Elements

2

RoHS

Compliant

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125 °C

Min Operating Temperature

-40 °C

Number of Outputs

8

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5 V

Polarity

Inverting

Number of Circuits

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.5 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4.5 V

Throw Configuration

DP4T

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

51 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

8 µA

Logic Function

Decoder, Demultiplexer, Demux

Number of Inputs

2

Number of Gates

The number of gates per IC varies depending on the number of inputs per gate. Two?input gates are common, but if only a single input is required, such as in the 744 NOT(or inverter) gates, a 14 pin IC can accommodate 6 (or Hex) gates.

2

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

-6 mA

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

3.5 pF

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

6 mA

Width

6.48 mm

Height

3.2 mm

Length

19.5 mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

Lead Free

Lead Free