National Semiconductor LMP2234AMAX

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

14

Operating Temperature (Max.)

125°C

Published

2011

JESD-609 Code

e0

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

14

ECCN Code

EAR99

Terminal Finish

Tin/Lead (Sn85Pb15)

Packing Method

TAPE AND REEL

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Number of Functions

4

Supply Voltage

2.5V

Terminal Pitch

The center distance from one pole to the next.

1.27mm

Reach Compliance Code

not_compliant

Pin Count

a count of all of the component leads (or pins)

14

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

2/5V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

AUTOMOTIVE

Number of Channels

4

Current - Output

22mA

Slew Rate

the maximum rate of output voltage change per unit time.

0.058 V/us

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio

91 dB

Unity Gain BW-Nom

128 kHz

Average Bias Current-Max (IIB)

0.00005μA

Low-Offset

YES

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Supply Voltage Limit-Max

6V

Low-Bias

YES

Micropower

the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

YES

Bias Current-Max (IIB) @25C

0.000001μA

Programmable Power

A programmable power supply provides remote control capability of the output voltage(s) via an analog control signal controlled by keypad or rotary switch from the front panel of the power supply or via a computer interface such as RS232, GPIB, or USB.

NO

Input Offset Voltage-Max

275μV

Wideband

NO

Power

NO

Slew Rate-Min

0.032 V/us

Length

8.6235mm

Height Seated (Max)

1.753mm

Width

3.899mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant