National Semiconductor ADC0832CCN/NOPB

Package / Case

01005 (0402 Metric)

Supplier Device Package

1005

Package

Bulk

Mfr

Stackpole Electronics Inc

Product Status

Active

Sample and Hold

NO

Single-Ended Input

YES

Input Polarity

Unipolar

Differential Input

Yes

Dual Supply Voltage (Min)

Not Required(V)

Operating Temperature Classification

Industrial

Package Type

PDIP

Dual Supply Voltage (Typ)

Not Required(V)

Rated Input Volt

5V

Single Supply Voltage (Min)

4.5(V)

Power Supply Requirement

Single

Operating Temp Range

-40C to 85C

Integral Nonlinearity Error

±1LSB(LSB)

Interface Type

Serial (Microwire)

Number of Elements

1

Single Supply Voltage (Typ)

5(V)

Rad Hardened

No

Dual Supply Voltage (Max)

Not Required(V)

Single Supply Voltage (Max)

6.3(V)

Digital Supply Support

NO

Mounting

Through Hole

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 125°C

Series

RMCF

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Rail/Tube

Size / Dimension

0.016 L x 0.008 W (0.40mm x 0.20mm)

Tolerance

±1%

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±200ppm/°C

Resistance

57.6 kOhms

Composition

Thick Film

Power (Watts)

0.03W, 1/32W

Pin Count

a count of all of the component leads (or pins)

8

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

800(W)

Input Type

Voltage

Architecture

SAR

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

SUPPLY(V)

Resolution

8Bit

Features

Automotive AEC-Q200

Number of Input Channels

2/1

Height Seated (Max)

0.006 (0.15mm)

Ratings

AEC-Q200