Murr Elektronik 85155

Mounting Type

Surface Mount

Package / Case

8-PowerSMD, Flat Leads

Supplier Device Package

8-DFN (3x3)

Current - Continuous Drain (Id) @ 25℃

20A (Ta), 30A (Tc)

Drive Voltage (Max Rds On, Min Rds On)

4.5V, 10V

Power Dissipation (Max)

3W (Ta), 23W (Tc)

Manufacturer Part Number

85155

Input Frequency

The Input Frequency refers to the frequency that mobiles and portables transmit on to access a Repeater.

50-60 Hz

Manufacturer

Murrelektronik

Mounting

DIN Rail

Modular version

Yes

Type of electric connection

Screw connection

Degree of protection (IP)

IP20

SIL according to IEC 61508

None

Rail mounting possible

No

Suitable for safety functions

Yes

Voltage type of supply voltage

AC

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 150°C (TJ)

Series

--

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Technology

MOSFET (Metal Oxide)

Depth

230

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

10 A

FET Type

N-Channel

Rds On (Max) @ Id, Vgs

5 mOhm @ 20A, 10V

Vgs(th) (Max) @ Id

2.2V @ 250µA

Input Capacitance (Ciss) (Max) @ Vds

951pF @ 15V

Gate Charge (Qg) (Max) @ Vgs

22.5nC @ 10V

Drain to Source Voltage (Vdss)

30V

Vgs (Max)

±20V

FET Feature

--

Overload Protection

Overload protection is a protection against a running overcurrent that would cause overheating of the protected equipment. Hence, an overload is also type of overcurrent. Overload protection typically operates on an inverse time curve where the tripping time becomes less as the current increases.

Yes

Nominal Input Voltage (AC)

120 VAC, 240 VAC

Width

115

Height

50