Murata Electronics BNX003-01

Lifecycle Status

DISCONTINUED (Last Updated: 1 month ago)

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Copper, Silver, Tin

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

Block, 4 Lead

Number of Pins

5

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Series

EMIFIL®, BNX

Size / Dimension

0.472Lx0.433W 12.00mmx11.00mm

JESD-609 Code

e1

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

PC Pins

ECCN Code

EAR99

Type

Low Pass

Terminal Finish

Tin/Silver/Copper (Sn/Ag/Cu)

Applications

Data Lines for Mobile Devices

Voltage - Rated DC

150V

Packing Method

BOX

Shielding

Unshielded

Number of Functions

3

Depth

11mm

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

10A

Frequency

5MHz

Voltage - Rated AC

150V

Insulation Resistance

The measurement of insulation resistance is carried out by means of a megohmmeter – high resistance range ohmmeter. A general rule-of-thumb is 10 Megohm or more.

100MOhm

Number of Channels

2

Max Current Rating

10A

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

50Ohm

Max Voltage Rating (DC)

150V

Circuit Type

There are 5 Main Types of Electric Circuit – Close Circuit, Open Circuit, Short Circuit, Series Circuit and Parallel Circuit.

Filter

DC Resistance (DCR) (Max)

100Ohm

ESD Protection

No

Attenuation Value

Attenuation is the loss of signal strength in networking cables or connections. This typically is measured in decibels (dB) or voltage and can occur due to a variety of factors. It may cause signals to become distorted or indiscernible.

40dB @ 5MHz ~ 1GHz

Insertion Loss (Max)

40 dB

Filter Order

The order of a filter also indicates the minimum number of reactive components that the filter will require. For example, a third-order filter requires at least three reactive components one capacitor and two inductors, two capacitors and one inductor, or in the case of an active filter, three capacitors.

5th

Height

0.512 13.00mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free